|
SPECIFICATIONS |
| ANALOG INPUT AND A/D CONVERSION |
| Load cell excitation |
10VDC±5%, 320mA |
| Input Sensitivity |
0.45㎶/D |
| Zero adjustment range |
-0.6mV~+42mV : combinations of 6bit dip switch |
| Input |
voltage |
Max. 32mV |
| impedance |
10㏁ (Min.) |
| noise |
0.6㎶p.p or Less |
| A/D converter |
type : dual slope type
resolution : 1/65,000 counts(16bits)
converting speed : 20times/sec |
| Non-linearity |
0.01% of full scale |
| Temperature-drift |
zero ±20PPM/℃
span ±20PPM/℃ |
| Overload tolerance |
+10% of full capacity |
| Display update rate |
20 times/sec | |
| DIGITAL SECTION |
| Display unit |
12.7mm(1/2"), 7digits
highly bright fluorescent tube
sub display : 7segment 12digit Red-FND
size : 9.2(H)x4.8(W)mmx1line |
| Annunciators |
steady, zero, tare, gross, sp1, sp2, run |
| Decimal point position |
0, 0.0, 0.00, 0.000 |
| Keyboard |
ten key, zero, net/gross, tare, formula, bin, run/stb, final, drib, free fall, clear, print, enter |
| External input signal |
opical-isolator |
| min. Division |
x1, x2, x5, x10, x20, x50 |
| max. Display |
+550,000 |
| Rear panel |
Loadcell input : 5pin connector
Remote control : 5pin input terminal (start, stop, tare, tare reset, zero)
BCD input : 37pin connector
C ontrol relay : 7pin terminal (final, drib, finish, batch finish, zero)
25pin : connector : 8pin control | |
| GENERAL |
| Data memory back-up |
appr. 10year |
| Power |
100/117/120/220/240V AC, ±10%, 50/60㎐ (factory preset) |
| Power consumption |
appr. 30VA |
| Operating condition |
temperature : -10~40℃ (14~104℉)
humidity : 85% Rh Max. (non-condensing) |
| Net weight |
2.4kg |
| Gross weight |
3.1kg |
| Physical dimensions |
(WxDxH) 200x175x105mm / (WxDxH) 7.87x6.89x4.33inch |
| Fuse |
250V/1A | |
|
|
OPTION |
| OP1 |
Printer I/F : Centronics Parallel |
| OP2 |
Analog Out : V - out(0~10V) |
| OP3 |
Analog Out : I - out(4~20mA) |
| OP4 |
Serial I/F : RS 422, RS485 |
| OP5 |
BCD Data Out-put |
| ※RS-232C and current loop : standard installed | |
|
|
DIMENSIONS |
 |
|
Applications |
 |
|
